Battery Usage; Using The Battery Pack (Cp-330 Only) - Canon CP-330 Guide D'utilisation

Battery Usage

Using the Battery Pack (CP-330 Only)

With the CP-330, you can use the rechargeable battery pack (Battery Pack NB-
CP1L) to print.
The battery pack can either be charged in the printer or with the separately sold
battery charger (included with the Battery/Charge Adapter Kit BCA-CP100).
Charging the Battery Pack in the Printer
Attach the battery pack NB-CP1L to the printer to charge it.
1
Terminal Cover
2
3
4
Compact Power Adapter
32
Remove the battery pack's
terminal cover.
• When the battery pack is not in use, always
store it with its terminal cover on.
Press the battery cover lever
down and remove the battery
cover.
Install the battery pack.
• Slide the battery pack into place, in the
direction of the arrow, and push it in until it
clicks into place.
• To remove the battery pack, push the
battery cover lever down and pull the battery
pack out. Replace the battery cover
afterwards.
Attach the power cord to the
compact power adapter CA-
To Power Outlet
CP100 and plug it into a power
outlet.
power cord