Canon CP-330 Guide D'utilisation page 34

5
Indicator
6
Charging the Battery Pack with the Battery Charger
Use the separately sold battery charger (included with the Battery/Charge Adapter
Kit BCA-CP100) to charge the battery pack NB-CP1L before attaching it to the
printer.
1
Remove the battery pack's terminal cover.
• Refer to step 1 of the Charging the Battery Pack in the Printer section (p. 32).
2
Charge Adapter
3
Attach the power cord to the compact power adapter CA-
CP100 and plug it into a power outlet.
• Refer to step 4 of the Charging the Battery Pack in the Printer section (p. 32).
Connect the compact power
adapter cable to the printer.
• The indicator lights orange while charging
and turns off once the battery pack is fully
charged.
Compact Power
Adapter Cable
Disconnect the compact power
adapter cable from the printer
once charging is complete.
Attach the battery pack to the
charge adapter.
• Attach it firmly in the direction of the arrow.
33