Using The Battery Pack; Installing The Battery; Charging The Battery - Canon SELPHY CP790 Guide D'utilisation

Using the Battery Pack

Use the (separately sold) battery pack NB-CP2L for printing images in places without a power outlet.
With a fully charged battery, you can print approximately 36 sheets of Postcard size paper.
1
2
3
For cautions concerning the battery refer to the user guide provided with the battery.

When

or longer,
and you press any button other than the q button,
seconds.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.

Installing the Battery

Air Vents

Charging the Battery

is displayed and you press any button other than the q button for 3 seconds
will disappear. When the screen is turned off while the battery is charging
Remove the battery cover.
Slide and hold the cover lock towards À, then

remove the cover towards Á.
Remove the battery terminal cover.
Attach the battery.
Insert the tab as shown in

shown in until it clicks and locks into place.
Á
Plug in SELPHY (p.
 Charging starts and
screen.
 Charging completes after approximately 4 hrs.
and disappears.
If you press the q button while the battery is

charging (p. 15), SELPHY can be used.
When you turn off the power
appears and charging resumes.
will appear after approximately 10
, then push as
À
12).
appears on the
(p. 15),
3