Installation; General - Hatco Toast King Manuel D'installation Et D'utilisation

INSTALLATION

General

Hatco Toast King Electric Conveyor Toasters are shipped with
®
all components pre-assembled. Care should be taken when
unpacking the shipping carton to avoid damage to the unit and the
components enclosed.
WARNING
ELECTRIC SHOCK HAzARD: Unit is not weatherproof.
Locate unit indoors where ambient air temperature is a
minimum of 70°F (21°C).
ExPLOSION HAzARD: Do not store or use gasoline or
other flammable vapors or liquids in the vicinity of this or
any other appliance.
FIRE HAzARD:
• Locate unit a minimum of 1" (25 mm) from combustible
walls and materials. If safe distances are not
maintained, combustion or discoloration could occur.
• Do not place anything on top of toaster. Do not place
toaster near or underneath curtains or other combustible
materials. Items near or on top of toaster could catch fire
causing injury and/or damage to toaster.
1. Remove the unit from the carton.
NOTE: To prevent delay in obtaining warranty coverage,
complete online warranty registration. See the
ImPORTaNT OWNER INFORmaTION section for
details.
2. Remove tape and protective packaging from all surfaces
of the unit.
3. Place the unit in the desired location. This may require two
people.
• Locate the unit in an area where the ambient air
temperature is constant and a minimum of 70°F (21°C).
avoid areas that may be subject to active air movements
or currents (i.e., near exhaust fans/hoods, air
conditioning ducts, exterior doors).
• make sure the unit is at the proper counter height in an
area convenient for use.
• make sure the countertop is level and strong enough to
support the weight of the unit and food product.
• make sure all the feet on the bottom of the unit are
positioned securely on the countertop.
Do not locate unit in an area subject to excessive
temperatures or grease from grills, fryers, etc. Excessive
temperatures could cause damage to the unit.
Do not locate toaster in an area that restricts air flow
around front or rear of unit.
Do not locate unit in area with excessive air movement
around unit. Avoid areas that may be subject to active air
movements or currents (i.e., near exhaust fans/hoods, air
conditioning ducts, and exterior doors).
4. Install the toast collector pan.
5. If the unit does not have a plug installed on the power cord,
contact a qualified electrician to determine and install the
proper voltage and size electrical plug. See the
SPECIFICaTIONS section for details.
NOTE: Hatco tests each toaster with bread product prior to
shipping.
8
English
NOTICE
Manual
Advance
Knob
Speed
Control
Selector
Switch
Toast Collector
Pan
TK-100 model
Form No. TRTKm-0816