Options And Accessories - Hatco Toast King Manuel D'installation Et D'utilisation

OPTIONS AND ACCESSORIES

4" (102 mm) Adjustable Legs
4" (102 mm) adjustable legs are available as accessories for all
models. Use the following procedure to install the legs.
NOTICE
Do not lay unit on the side with control panel or manual
advance knob. Damage to unit could occur.
1. Carefully place unit on its side.
2. Thread the 4" (102 mm) adjustable legs into the existing
leg holes on the bottom of the unit.
3. after all legs are secure, return the unit to the upright
position. This may require two people.
4. Level the unit by turning the
adjustable tip on each leg. Use
a 5/8" (16mm) open-end wrench
to make leveling adjustments.
Shorten
Lengthen
Adjustable Tip
12
Baskets for Jumbo Buns
Baskets for Jumbo Buns are available as accessories for
TK-100, TK-135B, and TK-155B models only. These baskets
accommodate large buns up to 5-1/2" (140 mm) in diameter.
Security Control Cover
an optional security control cover is available for all models (not
for field retrofit). a security control cover includes the control
cover, bracket, fuse cover, and mounting hardware.
Receptacles
Receptacles are available as accessories for units using
NEma 6-20P or NEma 6-30P plugs.
Mounting Brackets
mounting brackets are available as accessories to securely and
permanently mount a toaster. The brackets are installed in the
leg mounting holes. Fasteners not supplied.
English
Form No. TRTKm-0816