Installation; General - Hatco FLAV-R-SAVOR PFST Série Manuel D'installation Et D'utilisation

English

General

Flav-R-Savor Tall Holding Cabinets are shipped with most
®
components pre-assembled. Care should be taken when
unpacking the shipping carton to avoid damage to unit and
components enclosed.
WARNING
ELECTRIC SHOCK HAZARD: Unit is not weatherproof.
Locate unit indoors where ambient air temperature is a
minimum of 70°F (21°C).
FIRE HAZARD: Locate unit a minimum of 1" (25 mm) from
combustible walls and materials. If safe distances are not
maintained, discoloration or combustion could occur.
CAUTION
Locate unit in an area that is convenient for use. Location
should be level to prevent unit or its contents from falling
accidentally and strong enough to support weight of unit
and contents.
NOTICE
Do not lay unit on the side with the control panel. Damage
to unit could occur.
Form No. PFSTM-0816
1. Remove the unit from the carton. Two people are required
NOTE: To prevent delay in obtaining warranty coverage,
2. Remove tape, protective packaging, and contents from the
3. Carefully lay the unit on its side and attach the locking
4. Place the unit in the desired location.
5. Plug the unit into a properly grounded electrical receptacle
Installing Flav-R-Savor Tall Holding Cabinets
7
for this step.
complete online warranty registration. See the
IMPORTANT OWNER INFORMATION section for
details.
interior of the unit.
casters using the mounting hardware provided. Return the
unit to its upright position.
• Locate the unit in an area where the ambient air
temperature is constant and a minimum of 70°F
(21°C). Avoid areas that may be subject to active air
movements or currents (i.e., near exhaust fans/hoods,
air conditioning ducts, outside door openings).
• Make sure the floor is level and strong enough to support
the weight of the unit and food product.
of the correct voltage, size and plug configuration. See the
SPECIFICATIONS section for details.

INSTALLATION