EN
REGULAR MAINTENANCE
CLEANING OF SURFACES
See CLEANING INSTRUCTIONS manual
attached.
CLEANING THE WHIRLPOOL JETS
Loosen the jet using the key (1) provided, and
remove all the component parts. The ball (6)
can also be freed by unscrewing the nozzle and
pressing on the catch at the point indicated by
the arrow.
Clean with a lime scale remover and rinse with
water.
When reassembling the jet, take care that the
one seal (2) is correctly seated in the groove of
the outlet collar (3) and the other seal (4) in the
groove of the nut (5).
To ensure smooth operation of the jet, tighten
the nut without forcing.
TOPPING UP THE SANITIZER FLUID
(BASIC E)
Open the filler cap for the sanitizer (1) by turning
it anticlockwise.
Pour in the sanitizer fluid.
Close the sanitizer filler cap (1) by turning it
clockwise.
14
3
2
6
4
5
1
7
1
BASIC