Assembly - Greencut GLM200L Manuel D'utilisation

ASSEMBLY

ASSEMBLY AND HANDLEBAR ADJUSTMENT
ATTENTION: Folding or unfolding the handle improperly can damage the cables, causing an unsafe
operating condition. Do not damage the cables when folding or unfolding the handle.
If a cable is damaged, contact an Authorised Service Centre.
1. Release the clamping lever (15).
2. Fold out the lower part of the handlebar (3). The hooks (16) must
engage as shown.
3. Push the clamping lever towards the handlebar.
4. Screw the upper handle (2) with the bolts (17) and knobs (18) to
the lower handle.
5. Push the clamping lever towards the handlebar.
NOTE: If the upper handlebar is loose or separated from the lower handlebar, tighten the clamping
knobs by turning them clockwise.
INSTALLING THE GRASS CATCHER BAG
1. Attach the collection bag (19) to the cover of the collection basket (20).
2. Press the rubber edge as far as possible into the guide.
3. Lift the protective cover (7).
4. Fix the collection basket (4) to the hooks.
20
19
2
17
15
16
7 22
51
EN
18
4