Personal Safety - Greencut GLM200L Manuel D'utilisation

All information included in this manual is relevant to your own safety and that of your environment. If you have any
questions about the information included in this manual, consult a professional or contact the Authorised Service Centre.
The following information on hazards and precautions includes the most probable situations that may arise during the
use of this machine. Consult all the documentation, packaging and product labels before using it.
If you encounter a situation not described in this manual use common sense to use the machine as safely as possible
and, if you see danger, do not use the machine.
USERS
• This machine has been designed to be manipulated only by users of legal age who have read and understood these
instructions. Do not allow people who may not understand these instructions or under age to use this machine.
• Familiarize yourself with this machine before using it. Make sure you know the controls and safety devices and
how they should be used.
• If you are an inexperienced user, we recommend that you do some practice doing simple jobs and, if possible, in
the company of an experienced person.

PERSONAL SAFETY

• Be alert, watch what you are doing and use common sense when operating this machine. Never use the machine
with defective guards or without safety devices.
• Do not modify the controls of this machine.
• Do not use this machine if any of its components are damaged.
• Do not use this machine when you are tired or under the influence of drugs, alcohol or medicines.
• Remove all keys or hand tools from the work area before starting this machine. A key or tool that is nearby may
be touched by a moving part of the machine and be projected causing personal injury.
• Avoid unintentional starting of the machine, make sure the machine and power supply switches are in the OFF
position before connecting or moving the product.
• Always ensure that you maintain good balance and are in a safe position. Always maintain proper foot support
and operate the machine only when it is on a fixed, safe and level surface. Slippery or unstable surfaces can cause
a loss of balance or control of the machine.
• It is not recommended to use this machine on slopes with more than 5% difference in level. Cutting on mounds
can be dangerous. Be careful when walking on slopes or wet grass. Be especially careful when changing direction
on a slope. Cut parallel to the surface of the slope, never up and down. If you are an inexperienced user we
recommend that you have a minimum of practice on a flat surface.
• Do not put your hands or feet under the mower. Keep all parts of your body away from the blade when the
machine is in operation. Before starting the mower, make sure that the blade does not come into contact with
any objects.
• The cutting device of this machine is sharp. Keep all parts of the body away from the cutting elements and
moving parts when the machine is running. Before starting the machine, make sure that the cutting attachment
does not come into contact with any object.
• Hold the mower with both hands on the handlebars and always place your body behind it.
• Do not leave this machine running unattended.
• Do not attempt to remove the cut material from the cutting tool when it is in motion. Make sure that the machine
is switched off when you clean up any remaining material.
• Never hold the machine by the cutting tool. The cutting tools have sharp edges that can hurt you.
WORKWEAR
• Dress appropriately. Do not wear loose clothing or jewellery. Keep your hair and clothes away from moving parts. Use:
45
EN