Installing The Battery; Using The Product - Greencut GLM200L Manuel D'utilisation

52

INSTALLING THE BATTERY

NOTE: The battery must be charged before the first start.
TO INSTALL THE BATTERY
1. Press the lock button (12) and remove the battery from the device.
2. Insert the battery into the charger.
3. Plug the charger into the power supply.
4. The charge status is shown by the control lights (13).
5. Insert the battery pack into the device and ensure that it clicks into place correctly.

USING THE PRODUCT

START/STOP OF THE MOWER
TO START THE ENGINE
1. Insert the battery.
2. Insert the safety key into the machine (21).
3. Keep the security lock pressed.
4. Press and hold the safety lock button (8).
5. Pull the ignition lever (1) and keep it pressed.
6. Release the safety lock.
7. The unit will switch itself on with a delay of approximately 2 seconds.
TO STOP THE ENGINE
• Release the ignition lever.
ATTENTION: The operation of any mower can result in foreign objects being thrown into the eyes,
which can cause severe eye damage. Always wear safety glasses while operating the mower and
while performing any adjustments or repairs.
ATTENTION: Ensure that other people and pets remain at least 100 feet (30 m) away when the
mower is in use.
INSPECT THE CUTTING AREA
Remove all stones, sticks, wire, bones, and other debris that might be thrown by the rotating blades.
12
21
13
1
8