To Install Battery Pack; To Remove Battery Pack - Greencut GLM560L-20 Manuel D'utilisation

INSTALLING/REMOVING THE MULCHING PLUG
• To remove the mulching plug, lift the rear discharge
door (1).
• Grasp the handle (2) of the mulching plug.
Lift and pull the mulching plug out using the handle.
• The mulching plug (3) is in serted at an angle, so it requ
ires some force to remove it.
• The mulching plug must be removed in order to inst all
the grass catc her bag.
• The mulching plug must be re-inst alled when the grass
catc her bag is removed.
NOTE: When mulching, do not install
either the side discharge deflector or the
grass catcher bag.
INSTALLING SIDE DISCHARGE CHUTE
• Lift the side discharge cover (1).
• Align the grooves (2) on the discharge chute (3) with
the pins (4) on the underside of the discharge cover (1).
• Lower the discharge chute until the hooks on the mower
deck are secured in the openings in the discharge chute.
• Release the side discharge cover.
NOTE: When using side discharge, do not
install the the grass catcher bag. Ensure
the mulch plug is installed.
TO INSTALL/REMOVE BATTERY PACK

TO INSTALL BATTERY PACK

• Lift and hold up the battery door (1).
• Align the battery (2) with the mower's battery port.
• Make sure the battery release button (3) snaps in place
and that battery is fully seated and secure in the mower
before beginning operation.
• If the machine is not going to be used immediately,
remove the battery.

TO REMOVE BATTERY PACK

• Release the bail lever to stop the mower.
• Press the battery release button (3) on the mower. Open
the battery door.
• Remove battery from the mower.
1
2
3
4
2
2
59
EN
1
3
1
3