Assembly - Greencut GLM590X Manuel D'utilisation

74
TECHNICAL DATA
Engine
Cylinder capacity
Power
Starter system
Fuel capacity
Type of fuel
Oil Capacity
Oil type
Traction
Handlebar height adjustment
Blades
Cutting height
Cutting height
Grass catcher capacity
Chassis
Sound power level
Weight
NOTE: GREENCUT reserves the right to modify technical data without prior notice.

ASSEMBLY

ATTENTION: The lawn mower is supplied without fuel and oil in the engine. Your new lawn mower
has been tested at the production site which means that the engine can contain a small amount
of residual oil.
ASSEMBLY OF THE HANDLEBAR
1. Place the lower handlebar into position by aligning the two ends of the handlebar
with the metal mounting plates on the base of the mower and insert the screw
through the plate and into the handlebar.
NOTE: There is a notch in the metal bar where the screw head will seat
securely once it is attached.
GLM590X
Gasoline 4-stroke OHV
132cc
4,5cv / 2800rpm
EASY-START Manual
0,8L
Unleaded 95
0.4L
10W30 / 10W40 / 15W30 / 15W40
Rear / Self-propelled
Central adjuster
1 unit
25-75mm / 7 cutting heights
410mm (17")
45L
Steel
96 dB(A)
26Kg