Aux Mode; Adjusting The Rear Aux Input Mode - Blaupunkt Hamburg MP68 Mode D'emploi

Masquer les pouces Voir aussi pour Hamburg MP68:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

AUX mode

AUX mode
You can connect different external audio
sources to the device via the rear AUX in-
put:
C'n'C devices from the Blaupunkt acces-
sories programme (e.g. an iPod®/USB
interface).
CD changer
Other external audio sources, such as
portable CD players, MiniDisc players,
MP3 players or a non-C'n'C Blaupunkt
interface.
The C'n'C interface from Blaupunkt (C'n'C =
Command and Control) allows an even more
convenient control of devices and data car-
riers that are connected to the car sound
system via a C'n'C Blaupunkt interface.
This device is factory set for the connec-
tion of C'n'C Blaupunkt accessory devices.
If you want to connect a non-C'n'C device,
such as a CD changer or another external
audio source, please perform the settings
described in the following sections.
Note
Please note that the current software of
this device may not yet offer any C'n'C
support. In this case, the menu items
"CDC ON" and "C'N'C EDIT" are not avail-
able in the "Syst" system menu.
Your device can be rendered C'n'C-capa-
ble by means of a software update. Infor-
mation about the availability of this soft-
ware and the download can be found
under www.blaupunkt.com. To install
new software, please read the section
36
"Updating the device software" in the
chapter "Additional settings".
Adjusting the rear AUX input
mode
Note
This setting is omitted if the current soft-
ware of this device does not yet offer any
C'n'C support.
You can select between these modes for the
rear AUX input:
C'n'C mode for C'n'C Blaupunkt inter-
faces.
Non-C'n'C mode for non-C'n'C Blaupunkt
interfaces, CD changers and other ex-
ternal audio sources.
The C'n'C mode is activated by default.
To switch between C'n'C mode and non-
C'n'C mode,
press the MENU button
u
Press the rocker switch
u
the "Syst" system menu.
Press the rocker switch
u
the "CDC ON" menu item is selected.
Press the OK button
u
menu item.
Switch between the settings with the
u
rocker switch or
"CDC ON"
"CDC ON"
As soon as you change the setting, the de-
vice briefl y switches off and back on again
with the selected setting (Reset).
6
.
:
to open
:
or
until
2
to call up the
:
.
: Non-C'n'C mode.
: C'n'C mode.

Publicité

Table des Matières
loading

Table des Matières