Changing The Switch-Off Time (Offtimer); Resetting The Device (Normset) - Blaupunkt Hamburg MP68 Mode D'emploi

Masquer les pouces Voir aussi pour Hamburg MP68:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

You can exit a menu as follows:
You confi rm a setting with the OK but-
2
ton
and go back one higher menu
level.
Text input (e.g. your personal wel-
come text) should always be confi rmed
with the OK button
change.
The DIS•ESC button
rectly to the display of the active audio
source.
Text inputs are not automatically saved.
Pressing the DIS•ESC button
the text input without saving it. All other
settings are saved.
Every menu features the menu item
"EXIT". If you select "EXIT" and press the
2
OK button
, you return to the higher-
level menu.
If no selection or setting is performed in a
menu for approx. 8 seconds, the display au-
tomatically returns to the display of the au-
dio source (in the Bluetooth menu, this time
is approx. 30 seconds). Your settings - with
the exception of text inputs - are saved.
Changing the switch-off time
(OFFTIMER )
If you remove the control panel, the device
automatically switches off after 15 sec-
onds. This switch-off time can be changed:
Press the MENU button
u
Press the rocker switch
u
the "Syst" system menu.
2
to save the text
;
returns you di-
;
cancels
6
.
:
to open
Press the rocker switch
u
select the "OFFTIMER" function.
Press the OK button
u
Press the rocker switch or
u
adjust the switch-off time between
15 and 30 seconds.
Press the OK button
u
ferent function, or press the DIS•ESC
;
button
to exit the menu.
Resetting the device (NORMSET )
You can reset the device to the factory
settings (see appendix A1). Your person-
al settings. e.g. your welcome text, will be
deleted in the process.
Press the MENU button
u
Press the rocker switch
u
the "Syst" system menu.
Press the rocker switch
u
select the "NORMSET" function.
Press and hold down the OK button
u
for longer than 4 seconds.
"NORM ON" briefl y appears on the display.
The factory settings are restored. The ra-
dio briefl y switches off and automatically on
again during the process.
Note:
If you press and hold down the OK but-
2
ton
for less than 4 seconds, "NORM
OFF" is displayed. Your personal settings
are retained. Press the OK button
select a different function, or press the
DIS•ESC button
Startup
:
or
to
2
.
:
to
2
to select a dif-
6
.
:
to open
:
or
to
2
2
;
to exit the menu.
to
15

Publicité

Table des Matières
loading

Table des Matières