Signal Tone (Beep On) - Blaupunkt Hamburg MP68 Mode D'emploi

Alternately, you can select the "LAST VOL"
setting. This sets the volume at power-on to
the volume at the last switch-off:
In the System menu, press the rocker
u
:
switch or
"LAST VOL" menu item is selected.
Press the OK button
u
menu item.
Switch between the settings with the
u
rocker switch or
•
"LAST VOL"
•
"LAST VOL"
Press the OK button
u
ferent function, or press the DIS•ESC
;
button to exit the menu.
Note:
If "LAST VOL" is selected, the device is
switched on with the volume adjusted
under "ON VOL".
Changing volume presettings for TEL
and MUTE
If the device switches a phone call or navi-
gation announcement, it is always done with
the volume preset here.
In addition, you can assign a lower volume
up to the value 0 (mute) to the volume re-
duction (MUTE).
In the System menu, press the rock-
u
er switch or
these menu items is displayed:
•
"MUTE VOL ": Presetting the volume
of the volume reduction
repeatedly until the
2
to call up the
:
.
: On.
: Off.
2
to select a dif-
:
repeatedly until of
•
"TEL VOL ": Presetting the volume of
the phone call/navigation announce-
ment
Press the OK button
u
menu item.
The currently set volume is displayed.
Set the volume with the rocker switch
u
:
or .
Press the OK button
u
ferent function, or press the DIS•ESC
;
button to exit the menu.
Notes:
The volume preset by you will not be
used,
•
if the volume currently listened to is
lower than the set mute level. The de-
vice continues playing with the vol-
ume listened to.
•
if the volume currently listened to is
higher than the set TEL volume. In
this case, phone calls/navigation an-
nouncements are reproduced with
the volume listened to.
Activating/deactivating the signal tone
(BEEP ON)
You can deactivate the signal tone that
sounds as a confi rmation in the menus or
when storing the stations on the station but-
tons.
In the System menu, press the rocker
u
:
switch or
"BEEP ON" menu item is selected.
Press the OK button
u
menu item.
User settings
2
to call up the
2
to select a dif-
repeatedly until the
2
to call up the
55