Updating The Device Software - Blaupunkt Hamburg MP68 Mode D'emploi

Additional settings
9
meric keys while switching on the
device.
The version display with information about
the software appears.
Press the rocker switch
u
change between device components.
To exit the version display,
use the rocker switch
u
select the "EXIT" menu item.
Press the OK button
u
The display of the audio source previously
listened to is displayed.

Updating the device software

You can update the software of this device
without removing it. New software versions
can be found on the Internet under www.
blaupunkt.com. The software is transferred
to the device with a USB data carrier.
Note:
Please observe the information obtained
at www.blaupunkt.com for handling the
downloaded file and for installing the
software on your device.
To start the installation,
connect the USB data carrier with the
u
new software to the device.
Press the MENU button
u
Press the rocker switch
u
the "Syst" system menu.
60
:
or to
:
or to
2
.
6
.
:
to open
In the System menu, press the rocker
u
:
switch or
"SW DNL" menu item is selected.
Press the OK button
u
ing the new software.
repeatedly until the
2
to start install-