Ryobi RYAC800 Manuel D'utilisation page 12

Pelle à neige électrique de 304,8 mm (12 po)
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

WARNING:
Do not use snow shovel on ice, which can cause the
operator to slip and fall, resulting in possible serious
personal injury.
WARNING:
Do not wear loose clothing, scarves, or jewelry. They can
be caught in moving parts and cause death or serious
personal injury.
WARNING:
Keep all snow discharge pointed away from all electri-
cal devices to reduce the risk of electrocution or electric
shock.
WARNING:
Never point the snow shovel in the direction of people or
pets. Thrown snow or other objects can cause serious
personal injuries.
WARNING:
Make sure the area to be cleared is free of stones, sticks,
wires, gravel, and other objects that could be accidentally
thrown by the snow shovel in any direction and cause
serious personal injury to the operator and others.
OPERATION
 Take notice of the direction of the wind before beginning.
When possible, discharge snow in the same direction as
the wind to prevent snow from being thrown back into
your face.
 Work in one direction. Start the snow shovel and push
forward to clear snow, then stop the motor as you return
to the starting point to begin plowing another strip.
 The snow shovel has a clearing depth of 10 in. If your
snow is deeper than 10 in., it may take more than one
pass to clear.
 If the unit comes in contact with any type of obstruction
or debris during use, stop the snow shovel, disconnect
from power supply, remove the obstruction, and inspect
the unit carefully for damage before proceeding.
WARNING:
Never reach into the impeller or place any body part in
front of the snow shovel when the unit is operating or
when the unit is plugged in. Always ensure all moving
parts have stopped and the snow shovel has been un-
pugged before clearing any obstructions. Failure to follow
these instructions can result in serious personal injury.
 Some parts of the snow shovel can freeze under extreme
weather conditions. Do not attempt to operate the unit
with frozen parts.
 When finished, allow the unit to run for several minutes
to allow all snow to clear the impeller before storing.
10 — English

Publicité

Table des Matières
loading

Table des Matières