Technical Description - Cola TERMOBLITZ PLUS Manuel D'installation, D'utilisation Et D'entretien

Technical description

1.4
The stove works exclusively on pellets and enables easy installation with the heating system. The stove's automatic
control systems guarantee optimum heat output and complete combustion; there are also safety systems to
guarantee safe operation for the stove parts and for the user.
When correctly installed, the unit works in any outside climatic conditions, and in any case in critical conditions
(strong wind, frost, etc.) the safety systems can cut in, shutting down the stove.
The stove model TERMOBLITZ PLUS with nominal power of 21,2 kW ensures a maximum heatable volume of 517
m3, considering the coefficient of a building's energy requirements equal to 35 W/m3, and may vary depending on
the insulation, type and climatic zone which are important variables for the correct choice of unit. For technical data,
refer to the table on page 8.
TERMOBLITZ PLUS pellet heating stove dimensions
Key:
A - Power cable connection
B - Combustion air inlet
C - Water drain in overpressure (1/2" female)
D - Water supply connection
E - System return (3/4" male)
F - System delivery (3/4" male)
G - Ø80 mm flue pipe connection
H - Control panel model F047
I - Pellet hopper door
L - Adjustable feet
M - Turbulator shaker knobs
N – Button loading system (Opt.)
38
TERMOBLITZ PLUS