Switching The Alarm Function On/Off; Stopping The Alarm; Auto-Stop Function; Snooze Function - ADE WS 1601 Mode D'emploi

6. Using the buttons
(pause between two alarms). If you select OFF, the
SNOOZE function is deactivated.
7. Finally, press MODE to save the settings.

Switching the alarm function on/off

− Using the
off. As soon as the alarm symbol
alarm function is activated.

Stopping the alarm

At the set time you will be woken by an alarm signal, which
will become more intense as the waking time increases.
Switching the alarm off completely
− Press any button on the base station (except SNOOZE/
LIGHT) to stop the alarm.

Auto-stop function

If you do not press a button, the alarm switches off auto-
matically after 2 minutes. After 24 hours, the alarm will be
triggered again.

Snooze function

− Press SNOOZE/LIGHT when the alarm signal sounds.
The alarm signal goes silent after the snooze time set
by you. Then the device switches back on and the alarm
sounds again.
This procedure can be repeated multiple times. If the snoo-
ze function is activated, "z
Weather Station with Wireless Outdoor Sensor WS 1601
or , set the desired snooze time
button, turn the alarm function on and
" will be shown on the display.
Z
is displayed, the
63