Starting signal reception manually
If the radio signal symbol to the left is no longer
displayed, the radio signals from the time signal
transmitter are no longer being received. The time
indicator nevertheless continues precisely.
− Press and hold the
symbol is displayed again.
The signal reception is thus started manually.
Pay attention to the following:
If the reception was not successful, the reception sym-
bol fades out after a few minutes and the time on the
display continues normally.
Upon successful signal reception, the radio-controlled
alarm clock adjusts itself to the time of the time signal
transmitter. If you have already carried out manual
time and date settings, these will be automatically
adjusted.
Choosing a location
NOTE on material damage
Protect the base station and wireless sensor
Protect the base station from moisture.
54
from dust, impacts, extreme temperatures
and direct sunlight.
Position the base station exclusively in a dry,
closed room. The wireless sensor is protected
against moisture, but must be protected
from direct exposure to moisture, e.g. rain.
Weather Station with Wireless Outdoor Sensor WS 1601
button until the radio signal