Use; Setting The Humidity Alarm - ADE WS 1700 Mode D'emploi

2. Insert the batteries as shown on the base of
the battery compartment. Pay attention to
the correct polarity (+/-).
3. Close the battery compartment again.
Suggestions for changing the battery:
‚ A change of batteries is necessary when the
battery symbol or nothing at all is shown
on the display.
‚ Only use the type of battery that is specified
in the "Technical Data".
‚ Always exchange all of the batteries at the
same time.
‚ Dispose of batteries in an environmentally
appropriate way (see "Disposal").

Use

Setting the humidity alarm

1. Press the MODE button until a value and
blink simultaneously on the display.
Additionally, "ALERT" will be displayed.
2. Using the UP and DOWN buttons, set the
upper humidity limit (in 5% increments).
3. Press the MODE button again.
A value and
4. Using the UP and DOWN buttons, set the
lower humidity limit (in 5% increments).
Hygrometer WS 1700/1701
blink on the display again.
41