English
Mounting the Loop Handle
The new machine is delivered with the
loop handle pre-assembled on the unit.
Using the Barrier Bar
The barrier bar comes as a standard
with the machine and must be mounted
to the loop handle.
8
Mounting the Barrier Bar
1
1
2
2
5
5
3
3
Take out the screws (1) and remove
N
them along with washers (2) and
nuts (3)
Remove the loop handle (4) and
N
clamps (5)
2
4
Insert the square nuts (1) in the
N
barrier bar (2) – the holes must line
up
1
1
KM 56 R, KM 56 RC