Miele Complete C2 Mode D'emploi page 40

en
Adjusting the
floorhead (dia. 17, 18 + 19)
Depending on the model, your vacuum
cleaner will be fitted as standard with
one of the floorheads illustrated.
This vacuum cleaner can be used for
daily cleaning of carpets, rugs and ro-
bust hard flooring.
Miele offers a range of other floorheads,
brushes and accessories for other types
of flooring and special applications (see
"Optional accessories").
Please observe the flooring manu-
facturer's cleaning and care instruc-
tions.
Clean hard flooring which is not sus-
ceptible to scratching, as well as floor-
ing with gaps or deep crevices in it with
the brush protruding:
 Press the  foot control.
This type of flooring can be briefly va-
cuumed with the brush retracted. Car-
pets and rugs should be vacuumed with
the brush retracted:
 Press the  foot control.
If the suction power of the adjustable
floorhead seems too high, reduce the
suction until the floorhead is easier
to manoeuvre (see "Use" – "Regulat-
ing the suction power").
Using the SID Intensive floorhead
(depending on model)
Please observe the flooring manu-
facturer's cleaning and care instruc-
tions.
40
The SID floorhead is designed for brief
use on carpets and flooring with deep
gaps and crevices.
For continuous vacuuming we recom-
mend using the adjustable floorhead.
Adjustable floorhead (dia. 20)
The adjustable floorhead can also be
used for vacuuming the stairs.

For safety reasons when vacu-
uming stairs, it is best to start at the
bottom of the stairs and move up-
wards.
Unwinding the mains cable (dia. 21)
 Pull the mains cable out to the re-
quired length.
 Insert the plug into the socket.

If vacuuming for longer than 30
minutes, the cable must be pulled
out all the way. There is a risk of
overheating and damage.
Rewinding the cable (dia. 22)
 Switch off at the wall socket and un-
plug it.
 Press the rewind foot switch. The
cable will rewind automatically.
To switch on and off (dia. 23)
 Press the On/Off foot control .