Télécharger Imprimer la page

GEBUWIN WW250-/D/Ex Série Mode D'emploi page 10

Publicité

Les langues disponibles

Les langues disponibles

GB
1. Introduction
Dear client,
Thank you for having made your choice, you have chosen a professional hoisting product which has been
developed, produced and tested with the greatest of care.
However, it is our duty to draw your attention to the fact that firstly, it is essential to read these instructions for
use carefully and then to execute them before the product is actually put to use.
Further more, we wish to refer you to our website:www.gebuwin.com from which various accessories for this
winch can be purchased e.g. complete cable sets and special drive lubricating grease.
In addition, this website provides download information on the following:
service information
-
user's manual
-
GEBUWIN winch dealers
-
2. Safety Precautions
The winches, WW types, are hand-driven cable winches, to be attached to walls or constructions.
The winches are only to be used for the lifting of goods. Transport (lifting) of persons as well as their
being located under a moving load is not permissible.
The winches have a static safety factor of 4.
The winches are not suitable for:
mechanized drive
-
-
continuous use
Technical alterations and/or the attachment of marginal devices to the winches are permitted only with the
manufacturer's written consent.
Servicing, mounting, possible repairs and the winch maintenance are permitted only by specialized persons
who:
-
have been appointed and authorized
have been trained
-
-
are familiar with the correct regulations
always use original parts for repairs
-
2.1. Winch
The winch is equipped with a load pressure brake which holds the load at any required height and ensures that
it undergoes controlled lowering.
The load pressure brake must not be greased or oiled. This
destroys the brake function!
The stipulated hoisting capacity calculated on the first cable layer,
stated on the type identity sticker must not be exceeded.
The winch must at least be mounted with the required mounting
materials from chart 1.
Never touch moving parts during use!
Always run the following check before use:
brake function
-
-
quality of the cable and hoisting parts
carrier construction
-
The winch must be tested by a professional at least once a year.
No grease or oil.
9

Publicité

loading