Diamond Selection - Husqvarna PG 680 Manuel D'utilisation

Full set of single segments
Full set of twin segments
Generally speaking, the faster a diamond segment
wears, the faster the productivity will be. By varying the
above factors, changes can also be made to effect the
following:
• Scratch pattern.
• Current draw of machine.
• Flatness of fl oor (see next section).
• Ease of operation.

Diamond selection

Diamond Holder Disc
Position for Diamond segment
Diamond selection
The following section covers important factors to
consider when selecting the diamond segment you are
going to use for a given application.
Grinding disc set-up
The way diamond segments are set-up on the grinding
heads of the machine will also greatly infl uence the
performance of the machine, the productivity levels
and also the fi nished fl oor quality.
There are basically two types of diamond confi gura-
tions that can be used when using the grinder:
1. Full set of diamonds – when there are diamonds
placed
discs
2. Half set of diamonds – when there are diamonds
placed
Half set of single segments
Half set of twin segments
at each of the six positions on the diamond holder
(see pictures above).
at three alternating positions on the diamond holder
discs (see pictures above).
19
English -