Sony XAV-65 Mode D'emploi page 13

Steering Control
You can operate the unit with buttons on the
steering wheel.
For safety, park your car before making this
setting.
Unit status: Any status
Option Purpose
User To display the instruction and
panel for steering wheel control.
External () To deactivate steering wheel
control.
To use rotary commander
control.
User Defined
This setting is available only when [Steering
Control] is set to [User].
The steering button panel appears. Press and hold
a button to be assigned to the steering wheel.
Then press and hold the respective button on the
steering wheel.
Unit status: Any status
Option Purpose
– To display the instruction and
control panel.
Note
This function may not be available on some vehicles.
Sound Settings
Rear/Sub Out
Switches the audio output between the rear
speakers and subwoofer.
Unit status: Any status
Option Purpose
Rear To output audio signals to the
rear speakers (amplifier).
Subwoofer () To output audio signals to the
subwoofer.
Sound Adjust
Selects EQ3 and adjusts subwoofer level, balance/
fader level or crossover filter.
Unit status: Any status
Option Purpose
EQ3
OFF (), R&B, To select the equalizer curve;
Pop, Rock, customize the equalizer curve.
Hip-Hop, When setting [Custom], selects
Dance, the equalizer settings: [Low],
Country, [Mid], [High].
Custom
Subwoofer: To adjust the volume level of the
(ATT, –10 - +10) subwoofer. (Available only when
: 0
[Subwoofer] is set to [ON].)
Balance: To adjust the sound balance
(L 15 - 0 - R 15) between left and right speakers.
: 0
Fader: To adjust the sound balance
(Front 15 - 0 - between front and rear speakers.
Rear 15)
: 0
HPF: 80 Hz, To select the cut-off frequency of
100 Hz, the front/rear speakers.
120 Hz, 140 Hz,
160 Hz, OFF ()
LPF: OFF (), To select the cut-off frequency of
80 Hz, 100 Hz, the subwoofer. (Available only
120 Hz, 140 Hz, when [Subwoofer] is set to [ON].)
160 Hz
Screen Settings
Demo
Unit status: Any status
Option Purpose
OFF, ON () To activate the demonstration.
13
GB