Sony HT-A7000 Mode D'emploi page 16

3
Align the vertical line above the
"  TV CENTER LINE" printed on
the WALL MOUNT TEMPLATE
(supplied) with the center of the
width of your TV.
Center of the TV
WALL MOUNT
TEMPLATE
4
Align the "
LINE" printed on the WALL MOUNT
TEMPLATE with the bottom of the
required space between the
bottom of TV and the top of the bar
speaker (B) measured in step 2,
then adhere the WALL MOUNT
TEMPLATE on the wall with a
commercially available adhesive
tape, etc.
WALL MOUNT
Adhesive
TEMPLATE
tape, etc.
16
US
 BAR SPEAKER TOP
5
Fasten the screws prepared in step
1 securely into the screw marks on
the "
the WALL MOUNT TEMPLATE.
Screws
2.0 mm to
3.0 mm
(approx.
1/8 in)
6
Remove the WALL MOUNT
TEMPLATE.
7
Hang the wall mounting brackets
on the screws on the wall.
(B)
 SCREW LINE" printed on
387 mm 387 mm
(15 1/4 in) (15 1/4 in)
Marks
Wall mounting
bracket