Thermador Professional PCG24 Manuel D'installation page 10

7-11/16"
Corner Notch Detail
24" Wok/Griddle
A 24-3/4"
B 3/8"
C 0" (Control Panel Projecting 1-1/4" from Base Cabinet Face)
11/16" (Notch Required for Standard 24" - Deep Base Cabinet, Control Panel Projecting 9/16" from Base
Cabinet Face) 1-1/4" (Control Panel Flush to Cabinet Face - Min. 24-9/16" - Deep Base Cabinet Required)
D 24"
English 8
C
B
2 x 4 Corner
Support
Detail A: (Front Face of Cabinet)
30" Cooktop
29-7/8"
3/8"
29-1/8"
25-3/8"
5-1/4" TO CENTERLINE OF
GAS INLET
1-1/4"
Cabinet face for installation with projecting control panel
Cabinet face for installation with flush control panel
* Low Back required when there is less than 12"
horizontal clearance from back of cooktop to combustible
material. With more than 12" of clearance, the Island
Trim may be used.
36" Cooktop
35-7/8"
3/8"
35-1/8"
23-5/16"
48" Cooktop
47-7/8"
13/16"
46-1/4"
12"
1/2"
Side
Flange
7-5/8"
Figure 5: Side View of Cooktop