Troubleshooting - GreenWorks 2101202CT Manuel Du Propriétaire

TROUBLESHOOTING

PROBLEm
Motor fails to start when switch
trigger is depressed.
String trimmer stops while
cutting.
Line will not advance.
CAUSE
Check the battery capacity.
Check the power button.
Battery is not secure.
The trimmer head is bound
with grass.
The battery pack is too hot.
The battery pack is fully
discharged.
There is not enough line in the
spool.
24
SOLUTION
Recharge the battery per the
instructions in the battery
manual.
Press the power button if no
LED's are illuminated.
To secure the battery, make
sure the latches on the battery
compartment snap into place.
Stop the trimmer, remove the
battery, and remove the grass
from the trimmer head.
Remove the battery and allow
it to cool in a cool; dry area.
Recharge the battery per the
instructions in the battery
manual.
R e m o v e t h e b a t t e r y a n d
replace the trimmer line.