GreenWorks 2101202CT Manuel Du Propriétaire page 13

ASSEMBLY
ATTACHINg THE AUXILIARY HANDLE (See Figure 5.)
• Press the auxiliary handle onto the power head shaft so that the handle is angled toward the
rear handle that allows for comfortable operation.
• Slide the bolts through the holes in the auxiliary handle, and tighten them securely with a
Phillips Head screwdriver (not included).
LINE TRImmINg CUT-OFF BLADE (See Figure 6.)
The trimmer is equipped with a line trimming cut-off blade on the guard. Replace the string when
trimming efficiency diminishes. This will maintain best performance.
13
Fig. 5
CUT-OFF BLADE
Fig. 6