EINHELL CC-AC 35/10 12V Instructions D'origine page 10

3. Proper use
The equipment is designed for infl ating car,
motorcycle and bicycle tires as well as balls and
small air mattresses. The car compressor is ope-
rated via a 12V cigarette lighter socket (car, mobi-
le home, truck etc.).
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Power supply: ...........12V via cigarette lighter plug
Pumping capacity: .............. max. 10 bar (145 psi)
Working pressure max.: ...............8 bar (116 PSI)
Length of connection cable: ............ approx. 2,9 m
Length of air hose: ...................................... 1.5 m
Check pressure gauge: ...................... 0 - 10,3 bar
Operating time: ...........................max. 15 minutes
5. Before starting the equipment
Notes
•
The equipment's pressure gauge is not cali-
brated. The indicated values are not guaran-
teed to be exact air pressure values.
•
Check the gauge for damage before use.
•
The 12V power plug (Fig. 1 / Item 4) has an
integrated miniature fuse to protect the car
compressor. If the miniature fuse is defective,
the car compressor will not work and the mi-
niature fuse must be replaced by a miniature
fuse with the same rating. Unscrew the front
part of the plug for this purpose.
GB
6. Operation
Insert the cigarette lighter plug (Fig. 1 / Item 4)
into a matching 12 V cigarette lighter socket.
6.1 Using for the fi rst time
Important! Before you use the compressor for
the fi rst time, please read the „Important notes"
listed in section 1. After the compressor has been
running for 15 minutes, you must let it cool down
for 10 minutes.
•
Check the pressure gauge (Fig. 1 / Item 2)
before switching on.
•
To switch on, set the On/Off switch (Fig. 1/
Item 5) to „I".
•
To switch off, set the On/Off switch (Fig. 1/
Item 5) to „0".
6.2 Infl ating tires
Danger! Use a calibrated pressure gauge (e.g.
at a petrol station) to check the actual tire pres-
sure. It is imperative to read the information in the
vehicle's owner manual concerning the infl ation
of tires.
1. Remove the valve cap from the valve.
2. Screw the connector (Fig. 1 / Item 7) of the
compressed air hose onto the tire valve or
select the bicycle valve adapter (Fig. 2/13) as
required.
6.3 Infl ating footballs
Warning! Take care not to over-infl ate footballs or
they might bust.
•
Select the matching adapter (Fig. 2) and
screw it into the connector of the compressed
air hose.
6.4 Infl ating air mattresses etc.
Warning! Given the material composition of in-
fl atable mattresses, infl atable boats etc., the air
pressure cannot be indicated exactly. Take care
therefore not to over-infl ate such items or they
might burst.
•
Select the matching adapter (Fig. 2) and
screw it into the connector of the compressed
air hose.
- 10 -