Machine Layout And Items Supplied; Assembling The Components - EINHELL Royal BM 40 K Instructions De Montage Et Mode D'emploi

Anleitung BM 40_K-BM 46_K_SPK1:_
GB
necessary repairs before restarting and
continuing to work with the mower. If the lawn
mower begins to experience exceptionally strong
vibrations, immediately switch it off and check it.
18. Switch off the engine:
- when you leave the lawn mower.
- before you refuel.
19. When you switch off the engine, move the speed
lever (Fig. 14) to the Off position. Close the
petrol stopcock (Fig. 13).
Maintenance and storage
1. Make sure that all nuts, bolts and screws are
tightened securely and that the machine is in
safe working condition.
2. Never store the mower (with petrol in the tank)
inside a building in which petrol fumes could
come into contact with open flames or sparks.
3. Allow the motor to cool before you put the lawn
mower in an enclosed area.
4. In order to avoid fire hazards, keep the engine,
exhaust and the area around the fuel tank free
from grass, leaves and leaking grease (oil).
5. Routinely check the grass basket for signs of
wear and impaired functionality.
6. For your own safety, replace worn or damaged
parts without delay.
7. If the fuel tank should require emptying this
should only be done in the open air using a
petrol suction pump (available from DIY shops).

2. Machine layout and items supplied

(Fig. 1-3)
1 Engine start/stop lever (engine brake)
2 Control lever for engine adjustment (throttle
lever)
3 Upper push bar
4 Lower push bar
5 Petrol tank
6 Air filter
7 Spark plug
8 Oil dipstick
9 Flap for the grass basket
10 Grass basket
11 Starter cord
12 Lawn mower with engine
13 Spark plug wrench
14 Bolts for spark plug wrench
15 Screw for cable holder
16 2x screws for installing the lower push bar
17 2x screws for installing the upper push bar
18 2x star nuts
19 2x washers
20 Metal bracket for hooking on the starter cord
18
26.09.2007 8:14 Uhr Seite 18
21 2x nuts
22 1x cable tie
3. Proper operation
The petrol lawn mower is intended for private use i.e.
for use in home and gardening environments.
Private use of the lawn mower refers an annual
operating time generally not exceeding that of 50
hours, during which time the machine is primarily
used to maintain small-scale, residential lawns and
home/hobby gardens. Public facilities, sporting halls,
and agricultural/forestry applications are excluded.
The operating instructions as supplied by the
manufacturer must be kept and referred to in order to
ensure that the lawn mower is properly used and
maintained. The instructions contain valuable
information on operating, maintenance and servicing
conditions.
Important! Due to the high risk of bodily injury to the
user, the lawn mower may not be used to trim
bushes, hedges or shrubs, to cut scaling vegetation,
planted roofs, or balcony-grown grass, to clean (suck
up) dirt and debris off walkways, or to chop up tree or
hedge clippings. Moreover, the lawn mower may not
be used as a power cultivator to level out high areas
such as molehills.
For safety reasons, the lawn mower may not be used
as a drive unit for other work tools or toolkits of any
kind.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Assembling the components

Some parts of the mower come disassembled. For
quick and easy assembly, read and follow the
instructions below.
Important! You will need the following additional
tools (not supplied) for assembly, and also for
maintenance work:
An open-ended wrench (10 mm)
A ring wrench (17 mm)
A ratchet, extension, size 13 socket
An open-ended wrench (13 mm)
A flat oil drip tray (for changing the oil)
A 1 liter measuring jug (oil/petrol resistant)
A petrol can (5 liters is sufficient for approx. 6