Bosch GOP 12V-28 Professional Notice Originale page 16

16 | English
Do not treat the surface you will be working on with
u
any fluids that contain solvents. Poisonous vapours
may develop due to the materials heating up when being
scraped.
Take particular care when handling scrapers and
u
blades. The application tools are very sharp. Danger of in-
jury.
Secure the workpiece. A workpiece clamped with
u
clamping devices or in a vice is held more secure than by
hand.
In case of damage and improper use of the battery, va-
u
pours may be emitted. Ensure the area is well-ventilated
and seek medical attention should you experience any ad-
verse effects. The vapours may irritate the respiratory
system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g.
against continuous intense sunlight, fire,
water, and moisture. There is a risk of explo-
sion.
Product description and
specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for sawing and cutting wood-
based materials, plastic, plasterboard, non-ferrous metals
and mounting elements (e.g. non-hardened nails, clamps). It
is also suitable for working on soft wall tiles and for dry sand-
ing and scraping of small areas. It is ideal for working close to
edges and flush with surfaces. The power tool must only be
operated using Bosch accessories.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) On/off switch
(2) Battery release button
A)
(3) Battery
(4) Ventilation slots
1 609 92A 4A6 | (11.06.2018)
(5) Orbital stroke rate preselection thumbwheel
(6) Battery charge indicator
(7) Tool holder
(8) Clamping lever of the depth stop
A)
(9) Depth stop
A)
(10) Plunge cut saw blade
(11) Clamping bolt
(12) Hex key
(13) Handle (insulated gripping surface)
A)
(14) Dust extraction system
A)
(15) Sanding plate
A)
(16) Sanding sheet
(17) Clamping lever for dust extraction system
A)
(18) Dust extraction outlet
A)
(19) Dust extraction adapter
A)
(20) Dust extraction hose
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Cordless multi-cutter
Article number
Rated voltage
No-load speed n
0
Oscillation angle on left/right
Weight according to EPTA
Procedure 01:2014
Permitted ambient temperature
– during charging
B)
– during operation and dur-
ing storage
Recommended batteries
Recommended chargers
A) Depends on battery in use
B) Limited performance at temperatures <0 °C
Technical data determined using the battery that comes with the
product.
Noise/vibration information
Noise emission values determined according to
EN 62841-2-4.
Typically, the A-weighted sound pressure level of the power
tool is 79 dB(A). Uncertainty K=3 dB. The noise level when
working can exceed 80 dB(A).
A)
A)
GOP 12V-28
3 601 HB5 0..
V= 12
rpm 5000–20000
° 1.4
A)
kg 0.97–1.2
°C 0 to +45
°C −20 to +50
GBA 10,8V...
GBA 12V...
GBA 12V...W
GAL 11.. CV
GAL 12.. CV
GAL 18...W
Bosch Power Tools