Salvis Smartline AKI0 BI371824 Mode D'emploi page 27

3. Description of the appliance
Operating principle
● The energy directly heats the base of the pot or pan and with low loss, without unnecessary heat­
ing of the ceramic cooking surface. Thereby, the food to be cooked becomes hot quicker. The
ceramic cooking surface is only heated by the heat coming from the cookware. This largely pre­
vents food that boils over from sticking to the hob surface.
● Highest efficiency is only attained using "induction-heating compatible" pans and pots.
● Pan detection: The previously selected heat level is switched on automatically when an induction-
heating compatible pan is placed on the induction hob; removing the pan switches the hob off
again.
● Overheating protection/empty cooking protection: If the cookware is overheated, the cooking hob
switches off. Switching off due to overheating is carried out, for example, due to empty cooking,
unsuitable cookware, defective cookware (pot base has come away from the core).
3.1 Description of the functional components
Rotary switch On/Off
with power regulator
4. Commissioning
The appliance must be professionally connected before it is switched on. The on-site electrical con­
nected loads must match the connected loads on the appliance! For setting up and connecting, see
page 35, chapter 9.
. Before using the appliance for the first time, clean with a cleaning product that dissolves grease.
● Cleaning and care, refer to page 29, chapter 6.
Cooking hobs
Inlet air
Green indicator light to display
operating statuses
Wok bowl Ø 300 mm
Exhaust air
Air filter
en
Exhaust air
Inlet air
Adjustable feet
27 / 80