Last Calor TERMOVIOLA PLUS Manuel D'installation, D'utilisation Et D'entretien page 50

By accessing the submenu: DAY PROGRAM, the daily chronothermostat functions can be enabled/disabled and
set. It is possible to set two operation phases delimited by the times set according to the following table where the
OFF setting tells the clock to ignore the command.
Meaning
Selection
Activation time
Deactivation time
Activation time
Deactivation time
By accessing the submenu: WEEK PROGRAM it is possible to enable/disable and set the weekly
chronothermostat functions. The weekly programmer has 4 independent programmes whose final effect consists
of a combination of the 4 programmings. The weekly programmer can be activated/deactivated; also, by setting
OFF in the times field, the clock ignores the corresponding command.
Carry out programming making sure not to overlap the hours of activation and/or deactivation on the
same day in different programmes.
Menu level
Menu level
Menu level
Menu level
Possible values
PROGRAMME 1
Meaning
Selection
Activation time
Deactivation time
PROGRAMME 2
Meaning
Selection
Activation time
Deactivation time
PROGRAMME 3
Meaning
Selection
Activation time
Deactivation time
PROGRAMME 4
Meaning
Selection
Activation time
Deactivation time
50
Possible values
Possible values
Possible values
Possible values
TERMOVIOLA PLUS