Settings - ARTHUR MARTIN ASF8645ROX Notice D'utilisation

8
Consumption values
1)
Programme
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity
of dishes can change the values.
Information for test institutes
To receive the necessary information for
conducting performance tests (e.g.
according to EN60436), send an email to:
info.test@dishwasher-production.com
In your request please include the product
number code (PNC) found on the rating
plate.

SETTINGS

Programme selection mode and
user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter user mode.
Settings available in the user mode:
• The level of water softener according to
the water hardness.
• Activation or deactivation of the rinse
aid empty notification.
• The level of rinse aid according to the
required dosage.
• Activation or deactivation of the AirDry.
As the appliance stores the saved
settings, there is no need to configure
it before every cycle.
Water
(l)
11
8 - 15
14 - 16
12.5 - 14.5
10
12 - 14
For any other questions regarding your
dishwasher please refer to the service
book provided with your appliance.
How to set the programme
selection mode
The appliance is in programme selection
mode when the programme indicator
programme duration.
After activation, the appliance is in
programme selection mode by default. If
not, set the programme selection mode
the following way:
Press and hold simultaneously
until the appliance is in programme
selection mode.
Energy
(kWh)
0.857
0.7 - 1.7
1.2 - 1.5
1.4 - 1.7
0.9
0.8 - 1.0
is on and the display shows the
Duration
(min)
235
46 - 170
160 - 180
170 - 190
30
82 - 92
and