Information For Test Institutes; Settings - ARTHUR MARTIN ASF9500LOX Notice D'utilisation

8
1)
Programme
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity
of dishes can change the values.

Information for test institutes

To receive the necessary information for
conducting performance tests (e.g.
according to EN60436), send an email to:
info.test@dishwasher-production.com
In your request please include the product
number code (PNC) found on the rating
plate.

SETTINGS

Programme selection mode and
user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
Settings available in the user mode:
• The level of water softener according to
the water hardness.
• Activation or deactivation of the rinse
aid empty notification.
• Activation or deactivation of AirDry.
As the appliance stores the saved
settings, there is no need to configure
it before every cycle.
How to set the programme
selection mode
The appliance is in programme selection
mode when the programme indicator
Water
(l)
12.5 - 14.5
10
10 - 14
4
For any other questions regarding your
dishwasher please refer to the service
book provided with your appliance.
programme duration.
After activation, the appliance is in
programme selection mode by default. If
not, set the programme selection mode
the following way:
Press and hold simultaneously
Programme and Options until the
appliance is in programme selection
mode.
How to enter user mode
Make sure the appliance is in programme
selection mode.
To enter user mode, press and hold
simultaneously Départ Différé and Départ
until the indicators
Energy
(kWh)
1.4 - 1.7
0.9
0.8 - 1.0
0.1
is on and the display shows the
flash and the display is blank.
Duration
(min)
170 - 190
30
82 - 92
14
, and