Switching Off; Cleaning And Maintenance - Beurer HK 41 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18

4.6 Switching off

To switch the heating pad off, set the slider for ON/OFF and temperature settings to setting "0" (OFF). The
temperature settings are then no longer illuminated.
NOTE:
If the heating pad is not in use, switch the side slider for ON/OFF to setting "0" (OFF) and unplug the
power plug from the socket. Then disconnect the controller from the heating pad by unplugging the
plug­in coupling.

5. Cleaning and maintenance

WARNING
Before cleaning, always remove the power plug from the socket first. Then disconnect the control
from the heating pad by unplugging the plug­in coupling. Otherwise there is a risk of electric shock.
CAUTION
The control must never come into contact with water or other liquids, as this may cause damage.
• To clean the control, use a dry, lint­free cloth. Do not use any chemical or abrasive cleaning agents.
• Small marks on the heating pad can be removed with a damp cloth and if necessary, with a little liquid
detergent for delicate laundry.
CAUTION
Please note that the heating pad may not be chemically cleaned, wrung out, tumble dried, put through
a mangle or ironed.
• This heating pad is machine­washable.
• Set the washing machine to a particularly gentle wash cycle at 30 °C (wool cycle). Use a delicate laundry
detergent and measure it out according to the manufacturer's instructions.
CAUTION
Please note that frequent washing of the heating pad has a negative effect on the product. The heating
pad should therefore be washed in a washing machine a maximum of 10 times during its life.
• Immediately after washing, reshape the heating pad to its original dimensions while it is still damp and
spread it out flat on a clothes horse to dry.
CAUTION
• Do not use pegs or similar items to attach the heating pad to the clothes horse. Otherwise the
heating pad may be damaged.
• Do not reconnect the control to the heating pad until the plug­in connection and the heating pad
are completely dry. Otherwise the heating pad may be damaged.
WARNING
Never switch the heating pad on to dry it! Otherwise there is a risk of electric shock.
15

Publicité

Table des Matières
loading

Table des Matières