Intended Use - Beurer HK 41 Mode D'emploi

• The electrical and magnetic fields emitted by this heating pad may
interfere with the function of a pacemaker. However, they are still well
within the limits: electrical field strength: max. 5000 V/m, magnetic
field strength: max. 80 A/m, magnetic flux density: max. 0.1 milli­
tesla. Please consult your doctor and the manufacturer of your pace­
maker before using this heating pad.
• Do not pull, twist or make sharp kinks in the cables.
• This heating pad must be examined frequently for signs of wear or
damage. If there are such signs, if the heating pad has been mis­
used or does not work, return it to the supplier before switching it on
again.
• Under no circumstances should you open or repair the device your­
self, as faultless functionality can no longer be guaranteed thereafter.
Failure to adhere to this instruction will void the warranty.
• If the mains connection cable of this device is damaged, it must be
disposed of. If it cannot be removed, the device must be disposed
of.
• When this heating pad is switched on:
– Do not place any sharp objects on it.
– Do not place any heat sources, such as hot water bottles, heat
pads or similar, on it.
• The electronic components in the controller warm up when the heat­
ing pad is in use. For this reason, the control must never be covered
or placed on the heating pad when it is in use.
• It is essential to observe the information relating to the following
chapters: Operation, Cleaning and maintenance, Storage.
• Should you still have questions on using our appliances, please con­
tact our customer service.

3. Intended use

CAUTION
This heating pad is only designed to warm up the human body.
13