Bosch GBM 6 RE Professional Notice Originale page 12

OBJ_BUCH-836-005.book Page 12 Tuesday, May 6, 2014 11:27 AM
12 | English
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Keyless chuck
2 Front sleeve
3 Rear sleeve
4 Belt clip
5 Lock-on button for On/Off switch
Technical Data
Rotary drill
Article number
Rated power input
Output power
No-load speed
Rated speed
Rated torque
Spindle collar dia.
Speed control
Right/left rotation
Max. drilling dia.
– Steel
– Wood
– Aluminium
Chuck clamping range
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-1.
Typically the A-weighted noise levels of the product are:
Sound pressure level 82 dB(A); Sound power level 93 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
2
Drilling into metal: a =7.0 m/s , K=1.5 m/s
h
2
Screwdriving: a =4.0 m/s , K=1.5 m/s
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may signif-
icantly reduce the exposure level over the total working period.
1 609 92A 0N6 | (6.5.14)
6 On/Off switch
7 Rotational direction switch
8 Handle (insulated gripping surface)
9 Screwdriver bit*
10 Universal bit holder*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
min
min
mm
mm
mm
mm
mm
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2011/65/EU, 2014/30/EU,
2006/42/EC including their amendments and complies with
2
,
the following standards: EN 60745-1, EN 60745-2-1.
2
.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen, Germany
Henk Becker
Executive Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, Germany
20.03.2014
GBM 6 RE
3 601 D72 5..
W 350
W 136
-1
0 – 4000
-1
3116
Nm 12.3
43
6.5
15
8
1 – 10
kg 1.2
/II
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
GBM 6 RE
3 601 D72 6..
350
136
0 – 4000
3116
12.3
43
6.5
15
8
1,5 – 10
1.2
/II
Bosch Power Tools