Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Josef Kihlberg a.560PN22
KUDA PACKAGING
7
Before all maintenance tasks on the
stapler always first disconnect it from
the air supply.
7.1 CLEANING THE STAPLER
This stapler does not require special servicing. It only
needs regular cleaning with a non-aggressive (non-
corrosive) cleaner agent. Do not remove any parts for
cleaning purposes!
Check the proper functioning of all safety
devices daily. Make especially sure that:
–
the trigger works smoothly,
–
all screws and nuts are securely tightened.
–
the stapler is regularly lubricated (refer to chapter
5.2).
7.2 REMOVING JAMMED STAPLES
To remove a staple which has become jammed:
– Unscrew the six screws at the rear body (Fig 9).
– Remove rear body and the defective staple
(Fig 10).
– Assemble in the opposit way.
SERVIS A NAHRADNÍ DÍLY
10
www.kuda-packaging.com
PREVENTIVE AND CORRECTIVE MAINTENANCE
+420 607 237 237
info@kuda-packaging.com
Fig. 9
Fig. 10
servis@josef-kihlberg.eu
06.14
Publicité
Chapitres
Table des Matières
Dépannage
