Preventive And Corrective Maintenance; Cleaning The Stapler; Removing Jammed Staples - Josef Kihlberg c.561PN Mode D'emploi

Josef Kihlberg c.561PN
7
Before all maintenance tasks on the
stapler always first disconnect it from
the air supply.

7.1 CLEANING THE STAPLER

This stapler does not require special servicing. It only
needs regular cleaning with a non-aggressive (non-
corrosive) cleaner agent. Do not remove any parts for
cleaning purposes!
Check the proper functioning of all safety
devices daily. Make especially sure that:
– the trigger works smoothly,
– all screws and nuts are securely tightened.
– the stapler is regularly lubricated (refer to chapter
5.2).

7.2 REMOVING JAMMED STAPLES

To remove a staple which has become jammed:
– Unscrew the six screws at the rear body (Fig 9).
– Remove rear body and the defective staple
(Fig 10).
– Assemble in the opposit way.
10

PREVENTIVE AND CORRECTIVE MAINTENANCE

Fig. 9
Fig. 10
05.20