EINHELL TC-HP 1538 PC Mode D'emploi D'origine page 18

businesses or for equivalent purposes.
This machine is not allowed to be used by per-
sons (including children) with reduced physical,
sensory or mental capacities or those with a lack
of experience and knowledge.
4. Technical data
Rated voltage/frequency: ....... 220-240 V ~ 50 Hz
Power consumption: ................................ 1500 W
Rated pressure: ....................... 7.5 MPa (75 bar)*
Permissible pressure: ... max. 11.0 MPa (110 bar)
Rated fl ow rate: ......................................6.3 l/min
Max. water inlet pressure: ...........0.6 MPa (6 bar)
Protection class: ................................................. I
Weight: .......................................................7.5 kg
* The rated pressure depends on the accessories
used with the pressure washer.
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60335-2-79.
L sound pressure level ........................ 81 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level .......................... 96 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with
EN 60335-2-79.
Vibration emission value a
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
Anl_TC_HP_1538_PC_SPK7.indb 18 Anl_TC_HP_1538_PC_SPK7.indb 18
GB
≤ 2.5 m/s
2
h
- 18 -
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
5. Before starting the equipment
It is recommend for the power supply to this ma-
chine either to be connected via a residual current
device circuit-breaker, which interrupts the power
fl ow as soon as the leakage current to earth ex-
ceeds 30 mA for 30 ms, or for it to be equipped
with an earth tester.
Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
Warning!
Always pull the power plug before making
adjustments to the equipment.
5.1 Using the equipment correctly
•
The pressure cleaner must be stood on a le-
vel, stable surface.
•
It is recommended that you adopt the correct
operating position every time you use the
equipment, with one hand on the gun and the
14.10.15 10:19 14.10.15 10:19