Cleaning And Maintenance; Safety Advice; Cleaning - Bartscher 103.063 Mode D'emploi

CAUTION! Danger of injury!
Never use the unit if any liquids are on or inside the unit.
To avoid injury by electric shock, fire or otherwise, do not touch the unit if it has
been damaged. In such an event, immediately disconnect the unit from its power
source by removing the plug from its socket.
•
If the unit contains no plates or it is not to be used, disconnect it from its power
source by removing the plug from its socket.

6. Cleaning and maintenance

6.1 Safety advice

o Before beginning with repair or cleaning works make sure the device has been
disconnected from power socket (pull the power plug!!!) and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and the
plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets. Therefore, you must not
use any kind of pressure water jet for cleaning the device!

6.2 Cleaning

Wash the unit regularly.
o
Wash the casing, door(s) and shelves with a soft, moist cloth and delicate washing-up
o
liquid. Dry thoroughly with a soft cloth.
Only use a soft cloth and make sure you never use any kind of abrasive agents or
o
pads which could scratch the surface.
After the cleaning procedure, you should use a soft and dry cloth to wipe dry and polish
o
the surface.
Make sure the device has been cleaned properly before storing it in a dry place.
o
- 24 -