Environmental Protection; Declaration Of Conformity - Bosch PSP 260 Instructions D'emploi

Disposing of materials
After use and subsequent cleaning of the machine,
collect the thinning and cleaning agents and dispose
of in a environmentally correct manner.
Chemicals detrimental to the environment must never
enter the ground, ground water or lakes and streams.
Never pour material into the sewage system.
Paints, varnishes and solvents are special category
waste and must be disposed of accordingly. You
should comply with the relevant national and local reg-
ulations.
Follow the manufacturer's waste disposal instructions.
WARNING
Important instructions for connecting a new 3-
pin plug to the 2-wire cable.
The wires in the cable are coloured according to the
following code:
Strain relief
Live = brown
Neutral = blue
Do not connect the blue or brown wire to the earth ter-
minal of the plug.
Important: If the plug on the cable of this machine
must be replaced, dispose of the old plug to prevent
misuse.
If the machine should fail despite the care taken in
manufacture and testing, repair should be carried out
by an authorised customer services agent for Bosch
power tools.
For all correspondence and spare parts orders, always
include the 10-digit order number of the machine.

Environmental Protection

Recycle raw materials instead of disposing as
waste.
The machine, accessories and packaging should be
submitted for environment-friendly recycling.
These instructions are printed on recycled paper man-
ufactured without chlorine.
The plastic components are labelled for categorised
recycling.
1 609 929 F37 • (03.08) T
Service and Customer Advice
Exploded views and information on spare parts can be
found under: www.bosch-pt.com.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
Middlesex UB 9 5HJ
✆
✆
Fax . . . . . . . . . . . . . . . . . . . +44 (0) 18 95/83 87 89
Ireland
Beaver Distribution Ltd.
Greenhills Road
Tallaght-Dublin 24
✆
Fax . . . . . . . . . . . . . . . . . . . . . + 353 (0)1/459 8030
Australia
To be fitted
Robert Bosch Australia L.t.d.
by qualified
RBAU/SBT2
professionals only
1555 Centre Road
P.O. Box 66 Clayton
3168 Clayton/Victoria
✆
Fax . . . . . . . . . . . . . . . . . . . . +61 (0)1/800 819 520
www.bosch.com.au
E-Mail: CustomerSupportSPT@au.bosch.com
New Zealand
Robert Bosch Limited
14-16 Constellation Drive
Mairangi Bay
Auckland
New Zealand
✆
Fax . . . . . . . . . . . . . . . . . . . . . . +64 (0)9/47 82 914
We declare under our sole responsibility that this prod-
uct is in conformity with the following standards or
standardization documents:
EN 50 144 according to the provisions of the direc-
tives 89/336/EEC, 98/37/EC.
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Geschäftsbereich Elektrowerkzeuge
Specifications subject to change without notice
English–4
Service . . . . . . . . . . . . . . +44 (0) 18 95/83 87 82
Advice line. . . . . . . . . . . . +44 (0) 18 95/83 87 91
Service . . . . . . . . . . . . . . . . + 353 (0)1/414 9400
. . . . . . . . . . . . . . . . . . . . . +61 (0)1/800 804 777
. . . . . . . . . . . . . . . . . . . . . . . +64 (0)9/47 86 158

Declaration of Conformity

Dr. Eckerhard Strötgen
Head of Product
Certification