en Operating the appliance
Vario shelf
~ Fig. $
You can store tall items (e.g. cans or
bottles):
Take out the front part of the shelf
■
and push under the rear part.
Vegetable container
~ Fig. %
You can remove the container:
Lift the container at rear and remove.
■
You can insert the container:
Place the container on the telescopic
■
rails and push into the appliance.
Freezer tray
~ Fig. &
You can remove the tray:
Pull the container out all the way.
1.
Lift tray and remove.
2.
Frozen food container
~ Fig. '
You can remove the container:
Pull out the container all the way, lift
■
at the front and remove.
Storage compartment
~ Fig. (
You can remove the storage
compartment:
Lift up storage compartment and
■
remove.
Bottle holder
~ Fig. )
When you open and close the door:
The bottle holder prevents the
■
bottles from overturning.
34
Ice cube tray
You can make ice cubes:
Fill the ice cube tray 3/4 full with
1.
water and place in the freezer
compartment.
If the ice cube tray is stuck to
Note:
the freezer compartment, loosen with
a blunt implement only (e.g. spoon
handle).
To loosen the ice cubes, twist the ice
2.
cube tray slightly or hold briefly
under flowing water.
Ice pack
In the event of a power failure or a fault:
The ice pack delays the warming of
■
the stored frozen food.
The longest storage time is
Note:
obtained by placing the ice pack on the
food in the top compartment.
You can take out the ice pack for
temporarily keeping food cool, e.g. in a
cool bag.
1
Operating the
appliance
S witching on the appliance
O p e r a t i n g t h e a p p l i a n c e
Press the # button.
1.
The appliance begins to cool.
Warning signal, flashing temperature
display on the freezer compartment
and lit button alarm indicate that the
freezer compartment is still too
warm.
Press the alarm button.
2.
The warning signal switches off.
Setting the required temperature.
3.
~ "Setting the temperature"
on page 35