General Safety - HOLZMANN MASCHINEN FS 160L Mode D'emploi

11.3

General Safety

To avoid malfunctions, damage and physical injury MUST be observed:
 Safety must be observed and regularly inspected for completeness!
 Warning signs and / or labels on the machine which have been removed must be
replaced immediately!
Unauthorized modifications and tampering with the machine immediately invalidate
all warranty and damage
Operation of the machine only when sufficient light, at dusk, you should no longer
work.
With fatigue, lack of concentration or under the influence of drugs, alcohol or drugs is
prohibited to work with the machine!
The machine may only be operated by qualified personnel enrolled.
Third people, especially children, and people are not trained to think of the work
environment away!
When working with the machine, do not wear loose jewelry, wide or
protruding from the body of clothing, ties, long hair out, etc.
Loose objects can get caught in rotating parts of the machine and cause
serious injury!
Appropriate personal protective equipment (safety shoes with steel caps,
gloves, safety glasses, hearing protection, ...) wear!
The running machine should never be left unattended! Turn off the machine before
leaving the work area and wait until the motor has stopped!
Before maintenance or adjustments, the machine must be disconnected from the
power supply!
Use the inserted power wires for transport or manipulation of the machine!
DON'T TOUCH THE MILLS
Take care of the rotating milling cutter during operation.
NO WETNESS!
HOLZMANN MASCHINEN GmbH
D A N G E R
claims.
Operation and storage at rain or wet weather is forbidden.
www.holzmann-maschinen.at
SAFETY
31
FS 160L