Hach HQ40d Manuel D'utilisation De Base page 8

Figure 6 Single screen display
1 Calibration status indicator
2 Main measurement value and unit
3 IntelliCAL probe type and port
indicator
4 Battery status
5 Power source
6 Sample temperature (ºC or ºF)
7 Secondary measurement unit
8 Tertiary units (for some probes)
Dual-screen mode (HQ40d model only)
When two probes are connected to the HQ40d meter, the display can show
the reading from both probes simultaneously or show just one probe
(Figure 7).
Note: For probe calibration, change the screen mode to the single screen mode.
To change the screen mode to single or dual screen, use the
keys. In dual screen mode, the
and the key will select the probe on the right.
8 English
9 Time
10 Date
11 Read (OK, Select)
12 Display size icon
13 Calibrate (Cancel, Exit)
14 Sample and operator identification
15 Stability or display lock indicator
and
key will select the probe on the left
Figure 7 Dual-screen display
1 Probe that is connected to port on left
2 Probe that is connected to port on
right
Navigation
The meter contains menus to change various options. Use the
keys to highlight different options. Push the GREEN/RIGHT key to
select an option. There are two ways to change options:
1. Select an option from a list: Use the
option. If check boxes are shown, more than one option can be
selected. Push the BLUE/LEFT key under Select.
Note: To deselect check boxes, push the BLUE/LEFT key under Deselect.
2. Enter an option value using the arrow keys:
Push the and keys to enter or change a value.
3. Push the GREEN/RIGHT key to advance to the next space.
4. Push the GREEN/RIGHT key under OK to accept the value.
3 Measurement information for probe
on left
4 Measurement information for probe
on right
and
and keys to select an