Operating; Setting Up The Device - Bartscher 120.325 Mode D'emploi

5.3 Operating

Setting up the device

•
Prior to use, thoroughly clean the device and equipment (6.2 Cleaning).
•
Prepare food products for cutting.
•
Select the appropriate cutting blade and install it in the device to cut food products.
WARNING! Risk of injury!
The cutting blades are extremely sharp!
When installing or changing blades, always wear durable, soft gloves that allow safe
handling.
•
Loosen the safety close by turning
the knob counter-clockwise.
CAUTION!
The plastic disc is indispensible for proper functioning of the device. The plastic
disc must be installed first.
•
Close the safety cover and secure it by turning the safety close knob clockwise.
•
Press the green START button to engage the cutting blade properly.
•
Lift the pressing lever and tilt back
the safety cover.
•
First, insert the plastic disc, then
insert the cutting blade.
- 27 -