Bartscher 120.325 Mode D'emploi page 31

Removing and installing cutting blades
CAUTION!
Never turn the safety close knob when the device is in use, always turn the
device off first.
•
Loosen the safety close by turning the knob counter-clockwise.
•
Lift the pressing lever and open the safety cover.
•
Turn the cutting blade counter-clockwise.
•
Cover the cutting blade (e.g. with a
cloth), then lift the blade up while
grabbing under the blade and
removing it.
For work that requires the use of one cutting blade, mount only one rotating
cutting blade on the plastic disc.
For work that requires the use of two cutting blades, mount the blades in the
following order:
1. plastic disc
2. fixed cutting blade (e.g. cubing blade)
3. rotating cutting blade (e.g. slicing blade)
CAUTION!
After mounting the blades, ensure that the safety cover has been secured using
the safety close! Turn the knob clockwise.
- 30 -
•
Next, install the desired cutting
blade.